Swimming Pool PH Balancer | PH plus | PH Minus
PH-PLUS is used as Water Softener and pH Balancer. Granules for increasing a pH value below 7.0. Exact dosing is possible through an enclosed dosing cup. PH plus (also known as pH Increaser, Alkali, Soda Ash, or Sodium Carbonate) is used for increasing the recommended pH level of your swimming pool water.
It is compatible with all disinfection methods (chlorine, bromine, active oxygen), all filter types (filter systems with sand and glass filters, cartridge filters...), and all pool surfaces (liner, tiles, silico-marbled lining, polyester).
pH Plus+ is a simple professional water balancer powder. Safe and all-natural, pH Plus increases total alkalinity, reducing acidity in your hot tub or pool to bring water to the perfect neutral pH level, protect plumbing and plaster, and keep your water crystal clear.
Technical Parameter
| Items | pH Plus |
| Appearance | White granules |
| Content (%) | 99MIN |
| Fe (%) | 0.004 MAX |
Storage
Store in a cool dry place. Do not mix with other chemicals. Always wear suitable gloves and eye protection when handling chemicals.
Application
Perfect pH for swimming pools:
pH-Plus consists of high-quality sodium carbonate granules, which dissolve quickly and without residue. PH-Plus granules raise the pH value of the water and are dosed directly into the water when the pH value is below 7.0. The granules help to stabilize the TA value and effectively regulate the pH- value in the swimming pool water.
Spa Balance:
pH Plus+ makes it easy to maintain pH control in your hot tub. For best results, make sure the pump is running. Test the pH with pH paper. If the pH is below 7.2, add pH Plus+, pre-dissolved in water. Let the spa run for a few hours and try again. Repeat as needed.
PH-PLUS, when used in a pesticide tank mix, has the following beneficial effects:
Acidifies: Reduces pH of the water to a proper level (± pH 4.5) ideal for Pesticides
Softens Water Hardness: It neutralizes carbonate and bicarbonate of Ca, Mg salts, etc.
pH Indicator: Changes color automatically as pH changes (the color pink is ideal)
Buffer: Makes the pH remain constant
Wetting Agent & Surfactant: Reduces “surface tension“ for better distribution on foliar area
pH-Minus granules lower the pH-value of the water and are dosed directly into the water if the pH-value is too high (above 7.4).
pH-Minus is a granular powder of sodium bisulfate that does not cause turbidity. It works effectively with too-high pH values and allows one to reach quickly the ideal pH value (between 7.0 - 7.4).
Technical Parameter
| Items | pH Minus |
| Appearance | White to light yellow granules |
| Content (%) | 98 MIN |
| Fe (ppm) | 0.07 MAX |
Package:
1 , 5, 10 , 25 ,50 kg plastic drum
25kg plastic woven bag, 1000 plastic woven bag
As per clients' need
Application
This product is to be used exclusively for the specified purpose in accordance with this description.
Check the pH level at least once a week using PH test strips and, if necessary, adjust it to the ideal range of 7.0 to 7.4.
To lower the pH value by 0.1, 100 g of pH-Minus per 10 m³ is required.
Dose evenly at several points directly into the water while the circulation pump is running.
Tip: The pH regulation is the first step to clean pool water and optimal bathing comfort. Check the pH level at least once a week.
